
Customer Use (0x6) - (0x208)
  Customer Use
    Customer Use Word 1   0x208 (0x208)
    Customer Use Word 2   0x0 (0x0)

Interrupt Mask for I2C1 (0x16) - (0x2000008)
  Interrupt Mask for I2C1
    Port Interrupt Mask for I2C1
      Soft Reset                                    False (0x0)
      Hard Reset                                    False (0x0)
      Cable Reset Event                             False (0x0)
      Plug Insert or Removal                        True (0x1)
      PR Swap Complete                              False (0x0)
      DR Swap Complete                              False (0x0)
      FR Swap Complete                              False (0x0)
      RDO Received from Sink                        False (0x0)
      Built-In Self Test                            False (0x0)
      Overcurrent Event                             False (0x0)
      Attention Received                            False (0x0)
      Vendor-Defined Message Received               False (0x0)
      New Contract as Consumer                      False (0x0)
      New Contract as Provider                      False (0x0)
      Source Capabilities Message Ready             False (0x0)
      Sink Capabilities Message Ready               False (0x0)
      Low Voltage Warning                           False (0x0)
      PR Swap Requested                             False (0x0)
      DR Swap Requested                             False (0x0)
      Goto Min Received                             False (0x0)
      USB Host Present                              False (0x0)
      USB Host Present no longer                    False (0x0)
      High Voltage Warning                          False (0x0)
      PP Switch Changed                             False (0x0)
      Power Status Update                           False (0x0)
      Data Status Update                            True (0x1)
      Status Update                                 False (0x0)
      PD Status Update                              False (0x0)
      VCONN Swap Complete                           False (0x0)
      VCONN Swap Requested                          False (0x0)
      CMD1 Complete                                 False (0x0)
      CMD2 Complete                                 False (0x0)
      Error: Device Incompatible                    False (0x0)
      Error: Cannot Provide Voltage or Current      False (0x0)
      Error: Can Provide Voltage or Current Later   False (0x0)
      Error: Power Event Occurred                   False (0x0)
      Error: Missing Get Capabilities Message       False (0x0)
      Error: Protocol Error                         False (0x0)
      Error: Message Data                           False (0x0)
      Error: Discharge Failed                       False (0x0)
      Sink Transition Complete                      False (0x0)
      Error: Unable to Source                       False (0x0)
      Error: BIST Message Ignored                   False (0x0)
      AM Entry Failure                              False (0x0)
      AM Entered                                    False (0x0)
      Vendor Defined Message Sent                   False (0x0)
      Discover Mode Complete                        False (0x0)
      Exit Mode Complete                            False (0x0)
      User SVID Mode Entered                        False (0x0)
      User SVID Mode Exited                         False (0x0)
      User SVID Attention VDM Received              False (0x0)
      User SVID Other VDM Received                  False (0x0)
      DP SID Status Update                          False (0x0)
      Intel VID Status Update                       False (0x0)
      PD3 Status Update                             False (0x0)
      TX Mem Buffer Empty                           False (0x0)
      RX Mem Buffer Full                            False (0x0)
      Custom VDM Arrive                             False (0x0)
      Custom AM Entered                             False (0x0)
      Custom VDM Message Sent                       False (0x0)
      SOC ACK Timeout                               False (0x0)
      FRS Signal Received                           False (0x0)
      Chunk Response Received                       False (0x0)
      Chunk Request Received                        False (0x0)
      Alert Message Received                        False (0x0)
    Common Interrupt Mask for I2C1
      Patch Loaded      False (0x0)
      Ready for Patch   False (0x0)

Interrupt Mask for I2C2 (0x17) - (0x2000008)
  Interrupt Event for I2C2
    Interrupt Event for I2C2
      Soft Reset                                    False (0x0)
      Hard Reset                                    False (0x0)
      Cable Reset Event                             False (0x0)
      Plug Insert or Removal                        True (0x1)
      PR Swap Complete                              False (0x0)
      DR Swap Complete                              False (0x0)
      FR Swap Complete                              False (0x0)
      RDO Received from Sink                        False (0x0)
      Built-In Self Test                            False (0x0)
      Overcurrent Event                             False (0x0)
      Attention Received                            False (0x0)
      Vendor-Defined Message Received               False (0x0)
      New Contract as Consumer                      False (0x0)
      New Contract as Provider                      False (0x0)
      Source Capabilities Message Ready             False (0x0)
      Sink Capabilities Message Ready               False (0x0)
      Low Voltage Warning                           False (0x0)
      PR Swap Requested                             False (0x0)
      DR Swap Requested                             False (0x0)
      Goto Min Received                             False (0x0)
      USB Host Present                              False (0x0)
      USB Host Present no longer                    False (0x0)
      High Voltage Warning                          False (0x0)
      PP Switch Changed                             False (0x0)
      Power Status Update                           False (0x0)
      Data Status Update                            True (0x1)
      Status Update                                 False (0x0)
      PD Status Update                              False (0x0)
      VCONN Swap Complete                           False (0x0)
      VCONN Swap Requested                          False (0x0)
      CMD1 Complete                                 False (0x0)
      CMD2 Complete                                 False (0x0)
      Error: Device Incompatible                    False (0x0)
      Error: Cannot Provide Voltage or Current      False (0x0)
      Error: Can Provide Voltage or Current Later   False (0x0)
      Error: Power Event Occurred                   False (0x0)
      Error: Missing Get Capabilities Message       False (0x0)
      Error: Protocol Error                         False (0x0)
      Error: Message Data                           False (0x0)
      Error: Discharge Failed                       False (0x0)
      Sink Transition Complete                      False (0x0)
      Error: Unable to Source                       False (0x0)
      Error: BIST Message Ignored                   False (0x0)
      AM Entry Failure                              False (0x0)
      AM Entered                                    False (0x0)
      Vendor Defined Message Sent                   False (0x0)
      Discover Mode Complete                        False (0x0)
      Exit Mode Complete                            False (0x0)
      User SVID Mode Entered                        False (0x0)
      User SVID Mode Exited                         False (0x0)
      User SVID Attention VDM Received              False (0x0)
      User SVID Other VDM Received                  False (0x0)
      DP SID Status Update                          False (0x0)
      Intel VID Status Update                       False (0x0)
      PD3 Status Update                             False (0x0)
      TX Mem Buffer Empty                           False (0x0)
      RX Mem Buffer Full                            False (0x0)
      Custom VDM Arrive                             False (0x0)
      Custom AM Entered                             False (0x0)
      Custom VDM Message Sent                       False (0x0)
      SOC ACK Timeout                               False (0x0)
      FRS Signal Received                           False (0x0)
      Chunk Response Received                       False (0x0)
      Chunk Request Received                        False (0x0)
      Alert Message Received                        False (0x0)
    Common Interrupt Mask for I2C1
      Patch Loaded      False (0x0)
      Ready for Patch   False (0x0)

Global System Configuration (0x27) - (0x78000000141400800000000c0001)
  Global System Configuration
    PP Cable 1 Switch Config                       PP Cable Switch as Output, Guaranteed 4.5-5.5V (0x1)
    PP Cable 2 Switch Config                       PP Cable Switch Not Used (0x0)
    PP 1 Switch Config                             PP Switch as Sink or Source (0x4)
    PP 2 Switch Config                             PP Switch as Source Only (Output) (0x1)
    PP 3 Switch Config                             PP Switch Disabled (0x0)
    PP 4 Switch Config                             PP Switch Disabled (0x0)
    Power Duo Mode                                 False (0x0)
    87 Emulation Mode                              True (0x1)
    PP1 Switch to VBUS Map                         VBUS 1 (0x0)
    PP2 Switch to VBUS Map                         VBUS 1 (0x0)
    PP3 Switch to VBUS Map                         VBUS 1 (0x0)
    PP4 Switch to VBUS Map                         VBUS 1 (0x0)
    Reserved                                       Reserved, set 0 (0x0)
    PP Switch 1 Overcurrent Timeout                640 uS (0x4)
    PP Switch 1 Overcurrent Timeout Enable         Enabled (0x1)
    PP Switch 2 Overcurrent Timeout                640 uS (0x4)
    PP Switch 2 Overcurrent Timeout Enable         Enabled (0x1)
    I2C1 Enable as Master                          False (0x0)
    I2C3 Enable as Master                          False (0x0)
    I2C4 Enable as Master                          Disabled (0x0)
    Multiport Sink Policy                          Both sink paths will close switch (0x0)
    Sink Policy Non-overlap Time                   1 mSec (0x0)
    Multiport Alternate Mode Policy                Both ports can enter the same alternate mode (0x0)
    External Processor                             Default (0x0)
    Ice Lake Enable One UFP Policy                 Disable One UFP Policy (0x0)
    Ice Lake Enable Simple Source Policy Manager   Disable Simple Source Policy Manager (0x0)
    TBT Controller I2C Port                        I2C1 (0x1)
    I2C Timeout                                    1 S (0x7)
    SPI Read Only                                  False (0x0)

Port Configuration (0x28) - (0x819107f933808)
  Port Configuration
    Port Configuration                           UFP (0x0)
    Reserved                                     Reserved, set 0 (0x0)
    Receptacle Type                              Standard fully-featured USB-C receptacle (0x1)
    Audio Accessory Support                      False (0x0)
    Debug Accessory Support                      False (0x0)
    Type-C Supported Options                     No Options (0x0)
    Reserved                                     Reserved, set 0 (0x0)
    VConn Supported                              VCONN supported as DFP/UFP (accept VCONN_Swap requests) (0x3)
    USB3.0/3.1 Rate                              USB3 Gen1 signaling rate supported (0x1)
    Reserved                                     Reserved, set 0 (0x0)
    Set UVP to 4.5 V                             True (0x1)
    Under-voltage Protection Trip Point, PP_5V   10% (0x1)
    Under-voltage Protection Usage, PP_HV        10% (0x1)
    Over Voltage Protection Trip Point           24 V (0x3f)
    Over Voltage Protection Usage                Disconnect VBUS if voltage exceeds 15% of expected max. (0x3)
    High Voltage Warning Level                   Warning when source VBUS voltage exceeds 10% from nominal (0x0)
    Low Voltage Warning Level                    Warning when source VBUS Voltage dips below 10% from nominal (0x0)
    Soft Start Slew Rate                         0.41 V/mS typical (0x0)
    Reserved                                     Reserved, set 0 (0x0)
    Set UVP Debounce                             True (0x1)
    Reserved                                     Reserved, set 0 (0x0)
    Programmable Voltage Threshold               5 V (0x19)
    Programmable Power Threshold                 4 W (0x8)

Port Control (0x29) - (0x1030c2)
  Port Control
    Type-C Current                  3 A (strongest pullup) (0x2)
    PD Mode                         Normal PD Behavior (0x0)
    Process Swap To Sink            False (0x0)
    Initiate Swap To Sink           False (0x0)
    Process Swap To Source          True (0x1)
    Initiate Swap To Source         True (0x1)
    Reserved                        Reserved, Set 0 (0x0)
    Reserved                        Reserved, Set 0 (0x0)
    Process VCONN Swap              False (0x0)
    Process Swap to UFP             True (0x1)
    Initiate Swap to UFP            True (0x1)
    Process Swap to DFP             False (0x0)
    Initiate Swap to DFP            False (0x0)
    Automatic ID Request            False (0x0)
    AM Intrusive Mode               Not Supported (0x0)
    Force USB Generation 1          False (0x0)
    Externally Powered              False (0x0)
    Automatic Sink Cap              True (0x1)
    Sink Control Bit                False (0x0)
    Reserved                        Reserved, set 0 (0x0)
    15 kOhm Resistor Present        False (0x0)
    Data Contact Detection Enable   False (0x0)
    Charger Advertise Enable        Charger Advertise Disabled (0x0)
    USB Disable                     False (0x0)
    Charger Detect Enable           Charger Detect Disabled (0x0)

Transmit Source Capabilities (0x32) - (0x190000000000000000000000000000006412c0004b12c0004b03200019064000000510000fc02)
  Transmit Source Capabilities
    Tx Source PDO Config
      Active PDO Bank                Use Bank 0 (0x0)
      Active PDO Bank Follows EP     False (0x0)
      Transmit Source Send Pending   False (0x0)
    Bank 0 Settings
      Source PDO 1
        Switch Source                      PP2 sources this PDO (0x1)
        Maximum Current                    1 A (0x64)
        Voltage                            5 V (0x64)
        Peak Current                       100% (0x0)
        reserved                           reserved, set 0 (0x0)
        Unchunked Extended Msg Supported   False (0x0)
        USB Capable                        False (0x0)
        USB Suspend Supported              False (0x0)
        Supply Type                        Fixed Source (0x0)
      Source PDO 2
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0.5 A (0x32)
        Voltage           15 V (0x12c)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 3
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP2 sources this PDO (0x1)
        Maximum Current   3 A (0x12c)
        Voltage           15 V (0x12c)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 4
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP2 sources this PDO (0x1)
        Maximum Current   3 A (0x12c)
        Voltage           20 V (0x190)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 5
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 6
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 7
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Number of Bank 0 Source PDOs   2 (0x2)
    Bank 1 Settings
      Source PDO 1
        Switch Source                      PP1 sources this PDO (0x0)
        Maximum Current                    0 A (0x0)
        Voltage                            5 V (0x64)
        Peak Current                       100% (0x0)
        reserved                           reserved, set 0 (0x0)
        Unchunked Extended Msg Supported   False (0x0)
        USB Capable                        False (0x0)
        USB Suspend Supported              False (0x0)
        Supply Type                        Fixed Source (0x0)
      Source PDO 2
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 3
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 4
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 5
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 6
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Source PDO 7
        Advertised Mask   Always Advertise (0x1)
        Switch Source     PP1 sources this PDO (0x0)
        Maximum Current   0 A (0x0)
        Voltage           0 V (0x0)
        Peak Current      100% (0x0)
        reserved          reserved, set 0 (0x0)
        Supply Type       Fixed Source (0x0)
      Number of Bank 1 Source PDOs   0 (0x0)

Transmit Sink Capabilities (0x33) - (0x4004b12c400370dc4004b12c000000000000000000000000000000000004b12c0002d0dc3781912c01)
  Transmit Sink Capabilities
    Sink PDO Count
      Number of Sink PDOs   1 (0x1)
    Sink PDO 1
      Operating Current                            3 A (0x12c)
      Voltage                                      5 V (0x64)
      Peak Current                                 100% (0x0)
      reserved                                     reserved, set 0 (0x0)
      Fast Role Swap required USB Type-C Current   5V, 3.0A (0x3)
      Higher Capability                            True (0x1)
      Supply Type                                  Fixed Sink (0x0)
      Maximum Operating Current                    3 A (0x12c)
      Minimum Operating Current                    3 A (0x12c)
      Ask For Max                                  True (0x1)
    Sink PDO 2
      Operating Current           2.2 A (0xdc)
      Voltage                     9 V (0xb4)
      Peak Current                100% (0x0)
      reserved                    reserved, set 0 (0x0)
      Supply Type                 Fixed Sink (0x0)
      Maximum Operating Current   2.2 A (0xdc)
      Minimum Operating Current   2.2 A (0xdc)
      Ask For Max                 True (0x1)
    Sink PDO 3
      Operating Current           3 A (0x12c)
      Voltage                     15 V (0x12c)
      Peak Current                100% (0x0)
      reserved                    reserved, set 0 (0x0)
      Supply Type                 Fixed Sink (0x0)
      Maximum Operating Current   3 A (0x12c)
      Minimum Operating Current   3 A (0x12c)
      Ask For Max                 True (0x1)
    Sink PDO 4
      Operating Current           0 A (0x0)
      Voltage                     0 V (0x0)
      Peak Current                100% (0x0)
      reserved                    reserved, set 0 (0x0)
      Supply Type                 Fixed Sink (0x0)
      Maximum Operating Current   0 A (0x0)
      Minimum Operating Current   0 A (0x0)
      Ask For Max                 False (0x0)
    Sink PDO 5
      Operating Current           0 A (0x0)
      Voltage                     0 V (0x0)
      Peak Current                100% (0x0)
      reserved                    reserved, set 0 (0x0)
      Supply Type                 Fixed Sink (0x0)
      Maximum Operating Current   0 A (0x0)
      Minimum Operating Current   0 A (0x0)
      Ask For Max                 False (0x0)
    Sink PDO 6
      Operating Current           0 A (0x0)
      Voltage                     0 V (0x0)
      Peak Current                100% (0x0)
      reserved                    reserved, set 0 (0x0)
      Supply Type                 Fixed Sink (0x0)
      Maximum Operating Current   0 A (0x0)
      Minimum Operating Current   0 A (0x0)
      Ask For Max                 False (0x0)

Autonegotiate Sink (0x37) - (0x4b0c800000000003c3c69)
  Autonegotitate Sink
    General Settings
      Autonegotiate Sink Enable            True (0x1)
      Autonegotiate Variable Sink Enable   False (0x0)
      Autonegotiate Battery Sink Enable    False (0x0)
      USB Communication Capable            True (0x1)
      Offer Priority                       Choose Highest Power (0x2)
      No USB Suspend                       True (0x1)
      Giveback Flag                        False (0x0)
    Power Settings
      Auto Compute Sink Min Power              False (0x0)
      Auto Negotiate Sink Min Required Power   15 W (0x3c)

Alternate Mode Entry Queue (0x38) - (0x100000001ff01)
  Alternate Mode Entry Queue
    Alternate Mode Entry Queue record #1
      SVID (Standard or Vendor ID)   0xff01 (0xff01)
      Mode Position                  0x1 (0x1)
      Limited Entry                  False (0x0)
    Alternate Mode Entry Queue record #2
      SVID (Standard or Vendor ID)   0x0 (0x0)
      Mode Position                  0x1 (0x1)
      Limited Entry                  False (0x0)
    Alternate Mode Entry Queue record #3
      SVID (Standard or Vendor ID)   0x0 (0x0)
      Mode Position                  0x0 (0x0)
      Limited Entry                  False (0x0)
    Alternate Mode Entry Queue record #4
      SVID (Standard or Vendor ID)   0x0 (0x0)
      Mode Position                  0x0 (0x0)
      Limited Entry                  False (0x0)

PD3 Configuration Register (0x42) - (0x43a)
  PD3 Configuration Register
    Port Max Spec Revision                USB/PD Rev 3 (0x2)
    Plug Max Spec Revision                USB/PD Rev 3 (0x2)
    Unchunked Messaging Supported         True (0x1)
    Fast Role Swap Supported              True (0x1)
    Fast Role Swap not Initiated by UVP   False (0x0)
    Fast Role Swap Init in mSec           4 mS (0x4)
    Support Source Cap Extended Message   False (0x0)
    Support Status Message                False (0x0)
    Support Battery Capability Message    False (0x0)
    Support Battery Status Message        False (0x0)
    Support Manufacturer Info Message     False (0x0)
    Support Security Message              False (0x0)
    Support Firmware Upgrade Message      False (0x0)
    Support County Code Info              False (0x0)

Transmit Identity Data Object (0x47) - (0x820201234071000000000180004510000000000000000000000000000071000000000c440045143)
  Transmit Identity Data Object
    Record Counts
      Number of Identity Objects                        3 (0x3)
      Number of SOP' (Tethered Plug) Identity Objects   4 (0x4)
    Discover Identity Response
      UFP IDO Header
        USB Vendor ID                0x451 (0x451)
        Connector Type               Receptacle (0x2)
        Product Type (DFP)           Undefined (0x0)
        Modal Operation Supported    True (0x1)
        Product Type (UFP)           Undefined (0x0)
        Data Capable as USB Device   True (0x1)
        Data Capable as USB Host     True (0x1)
      Product Vendor Defined Object
        BCD Device       0x710 (0x710)
        USB Product ID   0x0 (0x0)
      Alternate Mode Adapter VDO
        USB SS Signalling       USB 2.0 Only (0x0)
        VBus Required           False (0x0)
        VConn Required          False (0x0)
        VConn Power             1 W (0x0)
        SSRx 2 Directionality   Fixed (0x0)
        SSRx 1 Directionality   Fixed (0x0)
        SSTx 2 Directionality   Fixed (0x0)
        SSTx 1 Directionality   Fixed (0x0)
        AMA Firmware Version    0x0 (0x0)
        AMA Hardware Version    0x0 (0x0)
      Certification Test ID   0x0 (0x0)
      UFP IDO VDO #5          0x0 (0x0)
      UFP IDO VDO #6          0x0 (0x0)
    SOP' (Tethered Plug) Discover Identity Response
      SOP' (Tethered Plug) IDO Header
        USB Vendor ID                0x451 (0x451)
        Product Type (DFP)           Undefined (0x0)
        Modal Operation Supported    False (0x0)
        Product Type (Cable Plug)    Passive Cable (0x3)
        Data Capable as USB Device   False (0x0)
        Data Capable as USB Host     False (0x0)
      Product Vendor Defined Object
        BCD Device       0x710 (0x710)
        USB Product ID   0x1234 (0x1234)
      Cable Vendor Defined Object
        USB SS Signalling                  USB 2.0 Only (0x0)
        VBus Current Handling Capability   3.0 A (0x1)
        Maximum Vbus Voltage               20V (0x0)
        Cable Termination Type             Both Ends Passive, VConn Not Required (0x0)
        Cable Latency                      < 10nS (~1m) (0x1)
        Type-C Plug to Type-C/Captive      Type-C (0x2)
        VDO version                        0x0 (0x0)
        Cable Firmware Version             0x0 (0x0)
        Cable Hardware Version             0x0 (0x0)
      Certification Test ID             0x0 (0x0)
      SOP' (Tethered Plug) IDO VDO #5   0x0 (0x0)
      SOP' (Tethered Plug) IDO VDO #6   0x0 (0x0)

User Alternate Mode Config (0x4a) - (0x0)
  User Alternate Mode Config
    General Settings
      User VID Enabled                      False (0x0)
      User Alternate Mode VID (Vendor ID)   0x0 (0x0)
      User VID Mode 1 Enabled               False (0x0)
      User VID Mode 2 Enabled               False (0x0)
      User VID Mode 3 Enabled               False (0x0)
      User VID Mode 4 Enabled               False (0x0)
    User Alternate Mode #1 Settings
      Mode Value                               0x0 (0x0)
      User VID Mode Load App Config Data       False (0x0)
      User VID Mode Auto Send Unstructed VDM   False (0x0)
      User VID Mode Autoentry Enabled          False (0x0)
    User Alternate Mode #2 Settings
      Mode Value                               0x0 (0x0)
      User VID Mode Load App Config Data       False (0x0)
      User VID Mode Auto Send Unstructed VDM   False (0x0)
      User VID Mode Autoentry Enabled          False (0x0)
    User Alternate Mode #3 Settings
      Mode Value                               0x0 (0x0)
      User VID Mode Load App Config Data       False (0x0)
      User VID Mode Auto Send Unstructed VDM   False (0x0)
      User VID Mode Autoentry Enabled          False (0x0)
    User Alternate Mode #4 Settings
      Mode Value                               0x0 (0x0)
      User VID Mode Load App Config Data       False (0x0)
      User VID Mode Auto Send Unstructed VDM   False (0x0)
      User VID Mode Autoentry Enabled          False (0x0)
    Unstructured VDM Settings
      User VID Auto Send VDO Data      0x0 (0x0)
      User VID Auto Send Vendor Data   0x0 (0x0)
      User Mode Auto Send VDO Count    0 (0x0)

Display Port Capabilities (0x51) - (0x110c1c4000)
  Display Port Capabilities
    Enable Display Port SVID                      False (0x0)
    Enable Display Port Mode 1                    False (0x0)
    DP Port Capability                            DP Disabled (0x0)
    Supports DP v1.3 signalling                   False (0x0)
    Supports USB Gen 2 signalling                 False (0x0)
    DP Receptacle Indication                      Receptacle (0x1)
    USB2.0 Signalling Not Used                    False (0x0)
    DFPD Receptacle or UFPD Plug Pin Assignment   C, D, E (0x1c)
    UFPD Receptacle or DFPD Plug Pin Assignment   C, D (0xc)
    Multifunction Preferred                       True (0x1)
    Preferred DP Role                             Prefers UFP_D (0x0)
    DFP_D / UFP_D Connected                       Only UFP_D Connected (0x2)
    DisplayPort Mode Auto Entry Allowed           False (0x0)
    Reserved, Set 0                               0 (0x0)

I/O Config (0x5c) - (0x4c000000000000000000000000002d7271000000000000000000000000000000000000000000000000000000000000200000000000e0)
  GPIO Event Map
    GPIO #0
      Multiplexing for GPIO 0 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #1
      Multiplexing for GPIO 1 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #2
      Multiplexing for GPIO 2 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #3 (DP HPD Port 0)
      Multiplexing for GPIO 3 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #4
      Multiplexing for GPIO 4 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #5 (I2C3)
      Multiplexing for GPIO 5 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           True (0x1)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            PP1 Switch Event (0x71)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #6 (Derived I2C3)
      Multiplexing for GPIO 6 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           True (0x1)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            PP2 Switch Event (0x72)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #7
      Multiplexing for GPIO 7 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           True (0x1)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Port 0 Source Sink Event (0x2d)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #8 (SPI MISO)
      Multiplexing for GPIO 8 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #9 (SPI MOSI)
      Multiplexing for GPIO 9 pin             Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #10 (SPI SCLK)
      Multiplexing for GPIO 10 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #11 (SPI CS)
      Multiplexing for GPIO 11 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #12 (SWD CLK)
      Multiplexing for GPIO 12 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #13 (SWD DATA)
      Multiplexing for GPIO 13 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #14 (PWM1)
      Multiplexing for GPIO 14 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #15 (PWM2)
      Multiplexing for GPIO 15 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #16 (PP3)
      Multiplexing for GPIO 16 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #17
      Multiplexing for GPIO 17 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Pin to GPIO (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #18
      Multiplexing for GPIO 18 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Reserved, Set 0 (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #19
      Multiplexing for GPIO 19 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Reserved, Set 0 (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #20
      Multiplexing for GPIO 20 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        False (0x0)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Reserved, Set 0 (0x0)
      Mapped Event                            Disabled (0x0)
      GPIO Polarity                           Direct-mapped Event (0x0)
    GPIO #21
      Multiplexing for GPIO 21 pin            Pin Multiplexed to GPIO (0x0)
      Map Pin to GPIO or Alternate Function   GPIO (0x0)
      Output Enable                           False (0x0)
      Interrupt Enable                        True (0x1)
      Initial Value                           0b0 (0x0)
      Open Drain Output Enable                False (0x0)
      Internal Pull Down Enable               False (0x0)
      Internal Pull Up Enable                 False (0x0)
      GPIO Analog Input Control               Reserved, Set 0 (0x0)
      Mapped Event                            Barrel Jack Detect Event (0x4c)
      GPIO Polarity                           Direct-mapped Event (0x0)

App Config Binary Data Indices (0x62) - (0x0)
  App Config Binary Data Indices
    Country Codes Start Index             0 (0x0)
    Country Codes Number of Indices       0 (0x0)
    Common I2C Record Start Index         0 (0x0)
    Common I2C Record Number of Indices   0 (0x0)
    Port 1 I2C Record Start Index         0 (0x0)
    Port 1 I2C Record Number of Indices   0 (0x0)
    Port 2 I2C Record Start Index         0 (0x0)
    Port 2 I2C Record Number of Indices   0 (0x0)
    Future Use 1                          0 (0x0)
    Future Use 2                          0 (0x0)

I2C Master Configuration (0x64) - (0x0)
  Slave Address Configuration
    Slave 1 Configuration
      Slave 1 I2C Address        0x0 (0x0)
      Slave 1 Master Selection   I2C1 (0x0)
    Slave 2 Configuration
      Slave 2 I2C Address        0x0 (0x0)
      Slave 2 Master Selection   I2C1 (0x0)
    Slave 3 Configuration
      Slave 3 I2C Address        0x0 (0x0)
      Slave 3 Master Selection   I2C1 (0x0)
    Slave 4 Configuration
      Slave 4 I2C Address        0x0 (0x0)
      Slave 4 Master Selection   I2C1 (0x0)
    Slave 5 Configuration
      Slave 5 I2C Address        0x0 (0x0)
      Slave 5 Master Selection   I2C1 (0x0)
    Slave 6 Configuration
      Slave 6 I2C Address        0x0 (0x0)
      Slave 6 Master Selection   I2C1 (0x0)
    Slave 7 Configuration
      Slave 7 I2C Address        0x0 (0x0)
      Slave 7 Master Selection   I2C1 (0x0)
    Slave 8 Configuration
      Slave 8 I2C Address        0x0 (0x0)
      Slave 8 Master Selection   I2C1 (0x0)
    Redriver 1 Configuration
      Redriver 1 I2C Address        0x0 (0x0)
      Redriver 1 Master Selection   I2C1 (0x0)
    Redriver 2 Configuration
      Redriver 2 I2C Address        0x0 (0x0)
      Redriver 2 Master Selection   I2C1 (0x0)

HW control Register (0x6b) - (0x0)
  HW control
    PWM enable
      Enable of PWM1      False (0x0)
      PWM1 clock source   100 kHz (0x0)
      PWM1 clock period   0 (0x0)
      PWM1 pulse width    0 (0x0)
    PWM 2
      Enable of PWM2       False (0x0)
      PWM2 clock source    100 kHz (0x0)
      PWM2 clock period    0 (0x0)
      PWM2 pulse width     0 (0x0)
    RCP mode
      PP1 Src RCP mode enable    Comparator Mode (0x0)
      PP1 Snk RCP mode enable    Ideal Diode Mode (0x0)
      PP2 Src RCP mode enable    Comparator Mode (0x0)
      PP2 Snk RCP mode enable    Ideal Diode Mode (0x0)
      PP1 Src RCP mode disable   False (0x0)
      PP2 Src RCP mode disable   False (0x0)
      PP1 Snk RCP mode disable   False (0x0)
      PP2 Snk RCP mode disable   False (0x0)

App configuration Register (0x6c) - (0x0)
  App configuration
    App Config Group 1 Settings
      App Config Mask, GPIO High Transition or User AM Enter   None (0x0)
      App Config Mask, GPIO Low Transition or User AM Exit     None (0x0)
      Command Channel to use for Command (not Task) Slot       CMD1 (0x08) (0x0)
      Command Channel to use for Command or Task Slot          CMD1 (0x08) (0x0)
      Alt Mode Entry / GPIO High 4CC Command (not Task)        Unknown (0x0) (0x0)
      Alt Mode Entry / GPIO High 4CC Command or Task           Unknown (0x0) (0x0)
      Alt Mode Exit / GPIO Low 4CC Command (not Task)          Unknown (0x0) (0x0)
      Alt Mode Exit / GPIO Low 4CC Command or Task             Unknown (0x0) (0x0)
    App Config Group 2 Settings
      App Config Mask, GPIO High Transition or User AM Enter   None (0x0)
      App Config Mask, GPIO Low Transition or User AM Exit     None (0x0)
      Command Channel to use for Command (not Task) Slot       CMD1 (0x08) (0x0)
      Command Channel to use for Command or Task Slot          CMD1 (0x08) (0x0)
      Alt Mode Entry / GPIO High 4CC Command (not Task)        Unknown (0x0) (0x0)
      Alt Mode Entry / GPIO High 4CC Command or Task           Unknown (0x0) (0x0)
      Alt Mode Exit / GPIO Low 4CC Command (not Task)          Unknown (0x0) (0x0)
      Alt Mode Exit / GPIO Low 4CC Command or Task             Unknown (0x0) (0x0)
    App Config Group 3 Settings
      App Config Mask, GPIO High Transition or User AM Enter   None (0x0)
      App Config Mask, GPIO Low Transition or User AM Exit     None (0x0)
      Command Channel to use for Command (not Task) Slot       CMD1 (0x08) (0x0)
      Command Channel to use for Command or Task Slot          CMD1 (0x08) (0x0)
      Alt Mode Entry / GPIO High 4CC Command (not Task)        Unknown (0x0) (0x0)
      Alt Mode Entry / GPIO High 4CC Command or Task           Unknown (0x0) (0x0)
      Alt Mode Exit / GPIO Low 4CC Command (not Task)          Unknown (0x0) (0x0)
      Alt Mode Exit / GPIO Low 4CC Command or Task             Unknown (0x0) (0x0)

Sleep Control Register (0x70) - (0x0)
  Sleep Control Register
    Sleep Mode Allowed            False (0x0)
    Delay 100 mS Before Sleep     False (0x0)
    Delay 1000 mS Before Sleep    False (0x0)
    Delay 30000 mS Before Sleep   False (0x0)
    Sleep on 5V non-PD Load       False (0x0)

Tx Manufacturer Info SOP (0x73) - (0x12340451)
  Tx Manufacturer Info SOP
    Vendor ID             0x451 (0x451)
    Product ID            0x1234 (0x1234)
    Manufacturer String   0x0 (0x0)

Tx Source Capabilities Extended Data Block (0x77) - (0x70000000000000000000000000001010000000012340451)
  Tx Source Capabilities Extended Data Block
    Identification
      Vendor ID (VID)         0x451 (0x451)
      Product ID (PID)        0x1234 (0x1234)
      Manufacturer ID (XID)   0x0 (0x0)
    Version
      Firmware Version   0x1 (0x1)
      Hardware Version   0x1 (0x1)
    Voltage Regulation
      Load Step   150 mA/uSec Load Step (0x0)
      Ioc         25% IoC (0x0)
    Compliance
      LPS Compliant   False (0x0)
      PS1 Compliant   False (0x0)
      PS2 Compliant   False (0x0)
    Touch Current
      Low Touch Current EPS                      False (0x0)
      Ground Pin Supported                       False (0x0)
      Ground Pin Intended for Protective Earth   False (0x0)
    Peak Current 1
      Peak Overload Current   0 % (0x0)
      Overload Period         0 mS (0x0)
      Duty Cycle              0 % (0x0)
      VBus Droop              False (0x0)
    Peak Current 2
      Peak Overload Current   0 % (0x0)
      Overload Period         0 mS (0x0)
      Duty Cycle              0 % (0x0)
      VBus Droop              False (0x0)
    Peak Current 3
      Peak Overload Current   0 % (0x0)
      Overload Period         0 mS (0x0)
      Duty Cycle              0 % (0x0)
      VBus Droop              False (0x0)
    Touch Temperature
      Touch Temperature   IEC 60950-1 Compliant (0x0)
    Source Inputs
      External Supply Present            False (0x0)
      External Supply is Unconstrained   False (0x0)
      Internal Battery Present           False (0x0)
    Number of Batteries
      Number of Fixed Batteries           0 (0x0)
      Number of Hot-swappable Batteries   0 (0x0)
    Holdup Time       0x0 (0x0)
    Source PD Power   7 W (0x7)

Tx Battery Capabilities (0x7d) - (0x12340451)
  Tx Battery Capabilities
    Fixed Battery #1 Capabilities
      Vendor ID                           0x451 (0x451)
      Product ID                          0x1234 (0x1234)
      Battery Design Capacity             0x0 (0x0)
      Battery Last Full Charge Capacity   0x0 (0x0)
      Battery Type                        0x0 (0x0)
    Fixed Battery #2 Capabilities
      Vendor ID                           0x0 (0x0)
      Product ID                          0x0 (0x0)
      Battery Design Capacity             0x0 (0x0)
      Battery Last Full Charge Capacity   0x0 (0x0)
      Battery Type                        0x0 (0x0)
    Fixed Battery #3 Capabilities
      Vendor ID                           0x0 (0x0)
      Product ID                          0x0 (0x0)
      Battery Design Capacity             0x0 (0x0)
      Battery Last Full Charge Capacity   0x0 (0x0)
      Battery Type                        0x0 (0x0)
    Fixed Battery #4 Capabilities
      Vendor ID                           0x0 (0x0)
      Product ID                          0x0 (0x0)
      Battery Design Capacity             0x0 (0x0)
      Battery Last Full Charge Capacity   0x0 (0x0)
      Battery Type                        0x0 (0x0)
    Hot-Pluggable Battery #1 Capabilities
      Vendor ID                           0x0 (0x0)
      Product ID                          0x0 (0x0)
      Battery Design Capacity             0x0 (0x0)
      Battery Last Full Charge Capacity   0x0 (0x0)
      Battery Type                        0x0 (0x0)
    Hot-Pluggable Battery #2 Capabilities
      Vendor ID                           0x0 (0x0)
      Product ID                          0x0 (0x0)
      Battery Design Capacity             0x0 (0x0)
      Battery Last Full Charge Capacity   0x0 (0x0)
      Battery Type                        0x0 (0x0)
    Hot-Pluggable Battery #3 Capabilities
      Vendor ID                           0x0 (0x0)
      Product ID                          0x0 (0x0)
      Battery Design Capacity             0x0 (0x0)
      Battery Last Full Charge Capacity   0x0 (0x0)
      Battery Type                        0x0 (0x0)

Tx Manufacturer Info SOP Prime (0x7f) - (0x12340451)
  Tx Manufacturer Info SOP
    Vendor ID             0x451 (0x451)
    Product ID            0x1234 (0x1234)
    Manufacturer String   0x0 (0x0)
